Sale!
 

Omron Safety (Sti) NX-SOD400

Original price was: $228.99.Current price is: $68.70.

SKU: EIZD3684893207 Category:
 

Description

Product Attribute Attribute Value
Application Automation
Family Name NX/IO Family
For Use With NX/IO Series
Input Voltage 24 VDC
Interface RS-422A/485
Maximum Current 0.5 / 2.0
Mounting Type Panel Mount
Safety Outputs 4
Series NX-SI / SO Series
Standards cULus: Listed (UL508), ANSI/ISA 12.12.01, EU: EN 61131-2, NK, LR, RCM, and KC: KC Registration

Overview

OMRON NX-SI Series Stand-Alone Safety Controller I/O Unit:

The NX Stand-alone Safety Controller is a powerful and robust Safety System that reaches the PLe according to EN 13849-1 and SIL3 according to IEC 61508. The EtherNet/IP coupler unit allows for connection to almost any PLC via EtherNet/IP or standard Ethernet communications. The flexible hardware allows the NX safety I/O units to be mixed in any combination with standard NX I/O units. Sysmac Studio software allows for configuration, programming, simulation and monitoring functionality.

The system allows up to 63 safety/standard I/O units per coupler; up to 32 safety I/O units to a maximum of 256 safety I/O signals. Configure systems with the right combination of I/O to optimize cost. The detachable terminal block of the I/O unit simplifies the commissioning and maintenance tasks. Screwless push-in connections speed up installation.

Features:

  • EN ISO13849-1 (PLe/Safety Category4), IEC 61508 (SIL3) certified
  • One connection using Safety over EtherCAT (FSoE) * protocol enables flexible configuration by mixing the Safety Units with standard NX I/O
  • 4 or 8 points per Safety Input Unit, 2 or 4 points per Safety Output Unit. Characterized by large output breaking current of 2.0 A
  • Integrated safety into machine automation possible by connecting with the NX-series EtherCAT Coupler
  • The Safety CPU Unit controls up to 128 Safety I/O Units
  • 4 or 8 points per Safety Input Unit. The 4-point Safety Input Unit can be directly connected with OMRON Non-contact Switches and Singlebeam Sensors
  • 2 or 4 points per Safety Output Unit. The 2-point Safety Output Unit is characterized by large output breaking current of 2.0 A.
  • The Safety Units can be freely allocated in any combination with standard NX I/O.
  • Compliant with IEC61131-3
  • Safety programs can be standardized and reused efficiently by using POUs for design and operation
  • Requirements for SIL 3 (Safety Integrity Level 3) in IEC 61508, EN 62061, Safety Standard for Safety Instrumented Systems (Functional Safety of Electrical/Electronic/Programmable Electronic Safety-related Systems)
  • Reviews

    There are no reviews yet.

    Be the first to review “Omron Safety (Sti) NX-SOD400”

    Your email address will not be published. Required fields are marked *